Freeze Branding Brand A Bull CO2 Portable Kit 2" Quick

Description

Brand A Bull Freeze Branding Kit 2" Numbers 0-8 (6 is reversed for 9) (4" does not include Carrying Case) numbers fall out! This is the most Unique Freeze Branding Setup you will find. If you're tired of running to town for Dry Ice, or Liquid Nitrogen, and only have a few animals at a time to do, this is the perfect setup. The Brand-A-bull Kit is supplied with separate dry-ice gun and numbers/digits components. The complete kit contains one set of ten digit moulds 0 to 9, either 2" (5cm) or 3" (7.5cm), a Brand a Bull dry ice gun and hose, a small plastic bottle for applying the meths or alcohol, operation manual and a demonstration video. (Note: The plastic bottle is suitable for small-scale branding jobs only, and should be replaced with a larger one for bigger jobs.) Special brand moulds to your own design, or letters A-Z, can be ordered if required. Tips for successful Freeze Branding 1. Fill digit-mould cavities completely, with well packed ice. Over filling is preferable. Under filling can cause failures. Apply immediately after filling. 2. Use a wetting agent liberally (methylated spirits or alcohol) direct from a sealed container and immediately prior to branding. Do not apply with a rag or brush from an open-top container. Open containers will absorb atmosphere moisture, which will reduce the effectiveness of the brand. 3. Pressure must be applied to the brand handle from the start to the end of the application time, but increasing towards the end to ensure constant contact of the reducing-thickness ice with the hide. 4. If the dry-ice is light and fluffy, and sometimes falls out of the mould, or if the gun does not shut-off completely or cleanly, there is very likely a partial block of the jet. This condition will produce unsatisfactory ice and consequently poor quality brands. Remove and reverse the nozzle jet.